RF Noise Meters of the following manufacturer
Definitions:
- R: Rent (available in Germany)
- U: Refurbished
- N: New
- B: Bargain offer
Acterna
| Type | Short description | R | U | N | B | Price [EUR] |
|---|---|---|---|---|---|---|
| FIT 400/900/1800 | Hand-held RF powermeter and VSWR tester designed for analog and digital mobile phones |
|
|
|
445.00 | |
Anritsu
| Type | Short description | R | U | N | B | Price [EUR] |
|---|---|---|---|---|---|---|
| MA2472A | ML24xxA series powermeter sensor, 10MHz to 18GHz, wide dynamic range -70 to +20dBm |
|
|
|
|
945.00 |
| MA2472B | ML24xxA series powermeter sensor, 10MHz to 18GHz, wide dynamic range -70 to +20dBm |
|
|
|
889.00 | |
| ML2437A | Numeric Power meter , Graphic Display, 9KHz to 110GHz, -70 to +44dBm, ( 100pW to 25W ) , Dynamic 90dB, GPIB |
|
|
|
2490.00 | |
| ML2438A | 2 Channels Numeric Power Meter, Graphic Display, 9KHz to 110GHz, -70 to +44dBm, ( 100pW to 25W ) , Dynamic 90dB, GPIB |
|
|
|
3695.00 | |
Agilent
| Type | Short description | R | U | N | B | Price [EUR] |
|---|---|---|---|---|---|---|
| 11683A | Range calibrator for power meters, output 10, 30, 100 and 300?W / 1, 3, 10 30 and 100mW, calibration uncertainty +/-0.25%. |
|
|
|
1995.00 | |
| 11848A | Phase noise measurements interface for 3048A system, 5MHz to 18GHz (opt 201 is included) |
|
|
12570.00 | ||
| 346A | Noise Source 10MHz to 18GHz, APC 3.5 |
|
|
|
1695.00 | |
| 346B | Noise Source 10MHz to 18GHz |
|
|
|
1495.00 | |
| 346C | Noise Source 10Hz to 26,5GHz, 3,5 APC Connector |
|
|
|
1995.00 | |
| 435B | Analogic Power Meter 100KHz to 50GHz, Level -65dBm to +44dBm according to the used probe, delivered with Probe Cable |
|
|
795.00 | ||
| 436A | Digital power meter, 100kHz to 50GHz according to the used probe (8480 series), GPIB. |
|
|
895.00 | ||
| 437B | Numeric Power Meter, 400KHz to 50GHz according to the used Probe, 50dB Dynamic, Memorised Call Factors, GPIB. |
|
|
|
1495.00 | |
| 438A | 2 Channels Numeric Power Meter, 400KHz to 50GHz, according to the used Probe, GPIB |
|
|
|
2445.00 | |
| 778D | Directionnel Coupler 0,2 to 2GHz, Output -20dB, N Connectors |
|
|
|
|
1490.00 |
| 84812A | Peak Power Sensor for use with the analyser 8990A, from 500MHz to 18GHz. |
|
|
|
1490.00 | |
| 84813A | Peak Power Sensor for use with the analyser 8990A, from 500MHz to 26.5GHz. |
|
|
|
1690.00 | |
| 84814A | Peak Power Sensor for use with the analyser 8990A, from 500MHz to 40GHz. |
|
|
|
1995.00 | |
| 84815A | Peak Power Sensor for use with the analyser 8990A, from 50MHz to 18GHz. |
|
|
|
1690.00 | |
| 8481A | Probe 10MHz to 18GHz, -30 to +20dBm |
|
|
|
740.00 | |
| 8481B | Probe 10MHz to 18GHz , 0 +44dBm so 25W Max |
|
|
|
1690.00 | |
| 8481D | Diode Probe 10MHz to 18GHz, 100pW to µW, -70 to -20dBm |
|
|
|
|
995.00 |
| 8482A | Probe 100KHz to 4,2GHz, -30 to +20dBm so 100mW Maximum |
|
|
|
744.00 | |
| 8483A | Probe for Power Meter 1µW to 100mW ( -30 to +20dBm ) 100KHz to 2GHz 75Ohms |
|
|
|
|
839.00 |
| 8484A | Probe for Power Meter 0,1nW to 10µW ( -70 to -20dBm ) 10MHz to 18GHz 50Ohms |
|
|
745.00 | ||
| 8485D | Probe for Power Meter 100pW to 10µW ( -70 to -20dBm ) 50MHz to 26,5GHz, delivered with attenuator | on request | ||||
| 8487A | Diode Probe 50MHz to 50GHz , 100pW to 10µW, -70 to -20dBm |
|
|
|
2295.00 | |
| 8487D | Diode Probe 50MHz to 50GHz , 100pW to 10µW, -70 to -20dBm |
|
|
|
2790.00 | |
| 8970A | 10MHz to 1500MHz Noise Figure Meter, needs a 346X Noise Source, GPIB |
|
|
|
4995.00 | |
| 8970B/20 | 10MHz to 2047MHz Noise Figure Meter, needs a 346X Noise Source, GPIB |
|
|
|
9850.00 | |
| 8990A | Peak power meter 2 channels, 50MHz to 40GHz according to the used Probe ( see 84812A to 84815A ), dynamic -32 to +20dBm, auto measurements, GPIB. |
|
|
|
12495.00 | |
| E4416A | Peak and average power meter, 1000 readings / s in GPIB mode, 50MHz to 18GHz, -65 to +20dBm, 300KHz, 1.5MHz, 5MHz modulation bandwidths, calibration factors stored in EPROM. |
|
|
|
2995.00 | |
| E5052A | Signal source analyzer 10MHz to 7GHz, input level -20 to +20dBm, sensitivity SSB < -140dBc/Hz (@ 1GHz with offset 10kHz and level +5dBm), frequency extension up to 26.5GHz with option E5053A, GPIB. |
|
|
on request | ||
| N4000A | Noise Source 10Hz to 18GHz, 6dB ENR, 3.5 APC connector. |
|
|
|
1995.00 | |
| N8973A | One box 10MHz to 3GHz Noise Figure Meter, needs a N4000A Noise Source, GPIB. |
|
|
|
22450.00 | |
| N8975A | One box 10MHz to 26,5GHz Noise Figure Meter, needs a N4002A Noise Source, GPIB. |
|
|
|
46950.00 | |
Rohde & Schwarz
| Type | Short description | R | U | N | B | Price [EUR] |
|---|---|---|---|---|---|---|
| DPS | Attenuator DC-2700MHz, 0-139dB with 1dB step |
|
|
1900.00 | ||
| NAS | Wattmeter/Stationary Wave Ratio Analogic on battery, with a wide Current Measurement Heads from 1 to 1990MHz, and 0,01 to 120W |
|
|
|
690.00 | |
| NAS-Z5 | Insertion unit for power meter NAS, 70 to 1000MHz, 0.01 to 120W. |
|
|
|
699.00 | |
| NRV-Z27 | Description to be added. In the meantime, please contact us for information. | on request | ||||
| NRV-Z31 | Peak sensor for digital power meter 30MHz to 6GHz, 1µW to 20mW |
|
on request | |||
| NRVS | 1-channel digital powermeter DC to 40GHz 100pW to 30W, 20 measurement configurations memory, 13 dgital filters, GPIB |
|
|
|
|
1495.00 |
Spinner
| Type | Short description | R | U | N | B | Price [EUR] |
|---|---|---|---|---|---|---|
| 22714 | High power attenuator 200W, 30dB, 50Ohms. |
|
|
|
395.00 | |